Open topic with navigation

Asset Management / Asset Management / Business Process Owner – IT Asset Manager
Asset Management / Enterprise Asset Management / Business Process Owner – IT Asset Manager
Asset Management / Telecom Asset Management / Business Process Owner – IT Asset Manager

Define Patch Panel Port Configuration

To create ports for the patch panels in your telecom inventory you can:

• create each port individually
• use the Telecom Console to create all the ports required for a patch panel with one command, based on data you enter in this task.

With this task, you define one or more configurations for each patch panel standard. The system will consult these configurations when you Automatically Create Ports for Patch Panels. For example, the configuration pictured below will generate 48 ports for patch panels of the PN48-CATS standard, and the ports will be numbered 1 through 48.

To define a new patch panel port configuration:

1. On the Process Navigator, select Business Process Owner – IT Asset Manager / Define Patch Panel Port Configuration.

   The Define Patch Panel Port Configuration view opens.

2. Select a patch panel standard in the Patch Panel Standards list.

   A list of one or more port standard configurations for the patch panel standard you selected opens.
   
   

3. Click Add New, located above the Port Standard Configuration list.
4. In the right pane, enter data to define a new configuration for the selected patch panel.

   Field	Purpose
   Port Standard	Click the Select Value button to select an existing port standard. To create a new port standard, do so in the Define Port Standards task.
   Prefix	If desired, create a prefix for each port number.
   Start Number	Specify the start number for the patch panel ports. If you enter 1, the first port is numbered 1, the second is numbered 2, and so on.
   Number of Ports	Enter the total number of ports to be generated.
   Port Description	If desired, enter a short description of the patch panel ports to be configured. Ordinarily, the description will correspond to the port standard.

5. Click Save to save the new port configuration.

   The new port configuration appears in the Port Standard Configuration list.

Note: You can also use the Port Standard Configuration data record to modify specifications for an existing configuration, or to remove a configuration from the list. Changes appear in the Port Standard Configuration list when you click Save or Delete above the form.

See also

Define Port Standards.